Quick Answer

Beyond the standard checks, an inspection on a manufactured home should look for signs of moisture, floor softness, roof and skirting condition, and any sign of prior transport or set issues. It should also confirm who was responsible for the foundation, tie-downs and utility connections. Before any of that, confirm which kind of home it is and check its build year against the title paperwork.

A manufactured home gets the same inspection as any house, and then some. The roof, plumbing, electrical and heating still matter. What a site-built checklist can miss is everything that comes from the home being built in a factory, moved to its site and set in place.

Start With Which Kind of Home It Is

Three words get used loosely, and they describe legally different homes. A manufactured home is built entirely in a factory to the federal HUD Code (in effect since June 1976; 24 CFR Part 3280) and transported to its site on a permanent chassis. A modular home is built in factory sections to the same state and local residential codes as a site-built house, then assembled on a permanent foundation. A mobile home, used correctly, means only a factory-built home from before June 1976, when the HUD Code took effect. A newer home is not one, whatever the listing calls it.

The category sets the starting point. For a manufactured home, locate the HUD label and the data plate, and check the build year against the title paperwork. Our lender post explains what those labels are and where to find them. For a modular home, there is no HUD label; confirm the state or local code documents instead.

The Points a Site-Built Checklist Can Miss

Ask for a full general inspection first. Then make sure the inspector gives these items a specific look on any resale manufactured home:

None of these replaces the rest of the inspection. They are the parts of the home that exist because it was built somewhere else and brought to the lot.

Moisture and Floors

Moisture and floor softness are best read together, because a soft floor raises the question of what is below it. Walk every room and note any spot where the floor gives. Then ask the inspector to look at the same area from underneath, if the space under the home can be reached. A soft floor is a question, not a verdict, and the inspector's notes on what is below it are what turn it into an answer.

Roof and Skirting

The roof gets the same attention it would on any house. The skirting is the item a site-built checklist has no line for. Ask the inspector to note its condition all the way around the home, and whether any panel is missing, loose or damaged.

Transport, Set and Tie-Downs

A manufactured home is built in a factory and finished on site. What happens on arrival matters as much as what happened at the factory: the home is set, leveled, anchored and connected to utilities where it sits. Ask the inspector to note any sign of prior transport or set issues.

Then ask the seller who set the home. The installer or set contractor is the party responsible for the foundation, tie-downs and utility connections, and factory, dealer and installer responsibilities can be separate. Get names, and get the answer in writing. If the seller says the home has been moved since it was first placed, note that as well, and read the lender post before you go further, because it covers how lenders treat a relocated home.

The Paperwork That Belongs With the Inspection

An inspection report is one document. On a manufactured home, it should sit next to a few others:

If the paperwork and the inspection disagree, that is the point to slow down and ask questions.

What About a Modular Home?

A modular home is built to state and local residential code, not the HUD Code. Once it is assembled on its foundation, it is regulated, inspected, appraised and titled like any other site-built house. The inspection looks much like one for a site-built home. It still arrived in sections and was set on site, so ask the same question about who did the set and who is responsible for the foundation and utility connections.

Does a New Home Need an Inspection?

Factory-built does not mean inspection-exempt. On a new placement, the installer's workmanship on site matters as much as the factory's. The final walk-through, the punch list (the documented list of items still to be finished or fixed) and the warranty paperwork close the loop. Walk it the same way you would a resale home, line by line.

Choosing the Inspector

Ask any inspector you are considering how often they inspect manufactured homes, whether they go underneath the home when the space can be reached, and whether you can see a sample report from one. The answers will tell you whether the items above will be covered without you having to ask for each one.

What the Inspection Does Not Settle

An inspection describes the home's condition. It does not decide which loan the home qualifies for; foundation and titling requirements for financing are lender questions, covered in What Does a Lender Need Before Financing a Manufactured Home? And what you do with the findings is handled under the inspection terms in your purchase contract. For the general inspections any Treasure Valley purchase may call for, see What Inspections Should I Get on a Treasure Valley Home?

How Charlie Helps Before You Make an Offer

Charlie helps you identify which kind of home you are looking at, what paperwork it should come with, and which of these items to put in front of your inspector, before you make an offer. He does not inspect homes; the inspector does. His part is making sure the right questions are asked about the home, its set and its records while there is still time to act on the answers.